Zip HydroTap Classic HT1783UK (DOMBCS4) Boiling, Chilled And Sparkling Water Chrome Tap
Zip HydroTap Classic HT1783UK Boiling, Chilled And Sparkling Water Chrome Tap
| Single Under Bench Command Centre |
 |
| Full colour, interactive touch screen display |
| Bright Chrome Tap |
 |
| Stunning, Classic bright chrome Zip tap |
| Zip 0.2 Micron Filter |
 |
| Your first filter |
| Bright Chrome Font |
 |
| With the Bright Chrome font you are able to install the tap further away from a sink providing there is access to a waste water pipe, cold water feed and electricity |
| Additional Zip 0.2 Micron Filter |
|
| Zip taps provide crystal clear, better-tasting water and the filter removes chlorine tastes, odours and impurities as tiny as one five-thousandth of a millimetre |
 |
| No more waiting for kettles to boil. Instant boiling water for cups of tea, pasta and all of your other boiling water needs. |
 |
| All water that passes through the tap is filtered to remove impurities and make your water as pure as possible |
 |
| The majority of people overfill a kettle each time they use it. Collectively this equates to a huge amount of Co2 waste |
1. Over a pre-existing sink - If you have a pre-existing sink with storage underneath for the control unit the tap can be installed directly on to that sink, utilising the existing sink for drainage of excess.
|
2. On a kitchen side or elsewhere in the kitchen (font required) - If you have somewhere else in mind adjacent to a sink or on another surface you will still be able to install but you will need to purchase the font. The font acts as drainage and the location you choose will need to be able to access your cold water pipes, as well as the wastewater pipes and electricity. |
How do I know when to change the filter?
The command centre has a filter change warning light that will illuminate when a filter change is recommended.
How easy are Zip filters to replace?
There is a very simple process to correctly replace the filter. Check out our - Guide to Replacing Your Zip Hydrotap Filter
Do I need a Limescale filter?
For areas where water hardness is a problem, for example when the level is above 4 degrees Clark (60 parts per million CaCO3), we recommend the use of the Zip Professional range of high-performance Limescale Filtration Systems.
For residential taps, Zip recommends the below Limescale filter kit
Downloadable Literature | ||
|
| |
|
| |
|
| |
Alternatives | ||
 | ||
| Zip HydroTap Classic HT1784UK Boiling And Chilled Water Chrome Tap
| |
 | Zip HydroTap G4 Vented All In One Boiling, Chilled & Sparkling Filtered Water Chrome Tap
| |
| MPN | HT1783UK |
|---|---|
| CE Approval | Yes |
| WRAS Approval | Yes |
| Finish | Bright Chrome |
| Water Connection | Cold Feed |
| Mixer Tap | No |
| Rotation | Fixed |
| Disability Options | Yes |
| Font Available | Yes |
| Installation Hole Cut Size | 35mm |
| Dispensing Height | 125 mm |
| Dispensing Height On Font | 230 |
| Country Of Origin | Australia |
| WEE Compliant | Yes |
| Height | 335 mm |
| Width | 338 mm |
| Depth | 461 mm |
