Zip HydroTap HT1711Z1UK G4 Chilled Water Brushed Chrome Tap

£3,287.40 £2,739.50
SKU
186343

Manufacturer Code: HT1711Z1UK

Previously: C175G4S

Other Available Finishes
Bright Chrome Matt Black

 

Zip HydroTap HT1711Z1UK G4 Chilled Water Brushed Chrome Tap

What's included in the pack?

Single Under Bench Command Centre
Full colour, interactive touch screen display
Brushed Chrome Tap
Stunning, Classic brushed chrome Zip tap 
Zip 0.2 Micron Filter
Your first filter


Available Extras
 

Why choose the Zip HT1711Z1UK Tap?

  
Due to the constant attachment to the mains water, access to chilled water is much faster than a typical water fountain
The one-off payment over time is much more cost-effective than regularly buying bottled water
In pursuit of environmental sustainability, this product removes the need for plastic bottles of water to be created, stored and delivered
 

 

What temperature is the chilled water?

The temperature for chilled water is adjustable between 5°C - 14°C

 

Where can I install the Zip HT1711Z1UK?

There are two main options for installation

1. Over a pre-existing sink - If you have a pre-existing sink with storage underneath for the control unit the tap can be installed directly on to that sink, utilising the existing sink for drainage of excess.

2. On a kitchen side or elsewhere in the kitchen (font required) - If you have somewhere else in mind adjacent to a sink or on another surface you will still be able to install but you will need to purchase the font. The font acts as drainage and the location you choose will need to be able to access your cold water pipes, as well as the wastewater pipes and electricity.
 

How easy are they to install?

Zip is known for quality and ease of use, these taps were designed to be easy for plumbers to install and even easier for customers to use. If you have a plumber they shouldn't have any issue with installation and Zip also offer an installation service if you would prefer. Find out more about Zip installations

 

How often does the filter need changing?

The filter has a capacity of 6,813 litres and Zip recommends changing the internal 0.2 micron 93702 filter every 12 months if this limit isn't reached.

Or
6813 Litres 12 Months

 

How do I know when to change the filter?

The command centre has a filter change warning light that will illuminate when a filter change is recommended.

 

How easy are Zip filters to replace?

There is a very simple process to correctly replace the filter. Check out our - Guide to Replacing Your Zip Hydrotap Filter

 

Does the Zip HT1711Z1UK tap provide boiling water? 

Unfortunately not, This tap is specifically designed to provide chilled water, If you require additional functionality there are alternative taps below.

 

Downloadable Literature

Specification Sheet

 

 

Tap Manual

 

Command Centre Manual

 

 
 
More Information
StyleClassic
FinishBrushed Chrome
Tap FunctionalityChilled Only
Chilled Per Hour (cups)175
MPNHT1711Z1UK
CE ApprovalYes
WRAS ApprovalYes
FinishBrushed Chrome
Water ConnectionCold Feed
Mixer TapNo
RotationFixed
Disability OptionsYes
Font AvailableYes
Installation Hole Cut Size35mm
Dispensing Height125mm
Dispensing Height On Font230
Country Of OriginAustralia
WEE CompliantYes
Height335mm
Width336mm
Depth480mm
Write Your Own Review
You're reviewing:Zip HydroTap HT1711Z1UK G4 Chilled Water Brushed Chrome Tap