Gledhill Stainless Lite Indirect 90 Litre Unvented Cylinder

It is available in 8 different sizes ranging from 90 litres to 400 litres, with the 400 litre model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coils corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

The Gledhill Stainless Lite is supplied complete with all the quality fittings you need:

• Immersion heater(s)
• Inlet control set
• 2 part zone valve (indirect)
• Benchmark Log Book
• Wiring centre (Indirect)
• 15mm/22mm tundish
• Dual thermostat (indirect)
• Expansion vessel
• Full installation /maintenance instructions
• Wall mounting bracket
• Temperature and pressure relief valve
• Expansion vessel hose