Floplast 20mm MDPE Pipe

The FloPlast `Alprene` range offers everything you could ask of a compression fitting. The fittings are suitable for use below ground on cold water services with polyehylene pipes manufactured in accordance with the requirements of BS 6572:1985 (BLUE)

Features:-

Immediately recognisable by its blue nut and black body.
High impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
The fittings have a co-polymer polypropylene Body, Nut and Thrust Ring, Acetal Grab Ring and Nitrile Seal.
Excellent pressure resistance, tested to 48 Bars. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme.
Tested and approved by various testing institutes worldwide. Water Bylaws Scheme Approved product. (20mm to 63mm range of fittings)
Simple and quick to connect : to fit the pipe you don’t need to dismantle the connector you don’t need to chamfer the pipe no time wasted; just cut the pipe, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!